| Pressure ranges |
See Fluke 2700 or 700, digital pressure gauges supported table page 3 |
| Pressure measurement specs |
See Fluke 2700 or 700, digital pressure gauges supported table page 3 |
| MNR 300 control range |
0 – 25 MPa gauge pressure |
| Gas storage system |
2 x 1 litre capacity, filling pressure limited to 28 MPa, tested to 45 MPa |
| Monitor gauges |
40 mm, analogue, all stainless steel: gas bottle pressure, regulated supply pressure, pressure at test port |
| Pressure regulator |
Minerva Model 180 high pressure regulator, Range 0 – 25 MPa |
| Volume adjuster |
Minerva Model 90, pressure balanced volume adjuster, displacement 11 cm3 max 67 turn, precise pressure setting to within 100 Pa, stainless steel interior |
| Needle valves |
Fine control valve for test pressure inlet and exhaust |
| Connections |
Low volume Minimess 1215, quick connect couplings with internal check valve |
| Test / filling hose |
Minimess 1215, length 2 meter, including 1⁄4″ NPT male connector |
| Refill connection |
For connection to nitrogen bottle, standard RU-3 |
| Quick lock system in lid |
Quick lock system for storing test hose and test connector |
| Housing |
Pelicase. Material: ultra high impact copolymer |
| Dimensions |
405 x 295 x 255 mm (L x W x H) |
| Weight |
Approx. 19 kg |
| Certification |
Pressure Equipment Directive (PED), Transportable Pressure Equipment Directive (TPED), CE conformity declaration |
| Accessories included |
2 meter test / filling hose, 1⁄4″ NPT male test adaptor, RU-3 refill connection |
| Documentation included |
Manual, PED conformity declaration, TPED conformity declaration, CE declaration |
| Ordering code |
MNR 300 – FL2700 |
